VT-300
GPRS/GPS AVL Units
VT-300 New Vehicle Tracking Unit 2012
Product Feature
- CAN Bus interface J1939.new
- 1-Wire® Protocol Integrated. new
- Support Wi-Fi 802.11b/g. new
- Built-in Radio Beacon. new
- Wireless HUB for sensors, OBDII interface, RFID tag plus remote control. new
- Communication by Voice, CS Data, SMS, GPRS UDP/TCP for 2G.
- Communication by Voice, SMS, Edge, UMTS and HSDPA for 3G.
- Configurable Tracking & Logging mode, by Time interval, Distance interval, Speeding changes, Heading changes and IG status.
- User Defined Interface(UDI), expandable for customization.
- GPS/GSM antenna tempering alert.
- GSM Jamming alert (optional).
- Geo-fencing control.
- Mileage report.
- Power Low/Lost alert.
- Towing away alert.
- Speeding alert.
- Power Management.
- Roaming preference settings.
- Maximum 100 settings in user defined reports.
- Internet Surfing via USB connection.
- Configuration over the air.
- Firmware upgrading over the air.
Hardware Specification
- Dimensions (L x W x H): 115: 75: 32 mm.
- Casing: ABS plastic.
- GPS Module: 66 channels high sensitivity GPS receiver.
- Communication: Quad-band 850/900/1800/1900 MHz in 2G GSM/GPRS, or Tri-band 850/900/2100 MHz in 3G UMTS/HSDPA.
- Power Source: DC 8-40V.
- Power Consumption in sleeping mode:
- <10uA@ DC 3.7V, back-up battery power supply condition;
- <4mA@ DC 12V, main power supply condition.
- Memory Capacity: 4MB, storage over 100,000 waypoints.
- System Setting: 100 user defined events.
- Device Ports:
- 4 input ports, with 2 positive triggering and 2 negative triggering (includes 2 analog);
- 4 output ports, 4 negative triggering;
- 1 serial port, TTL/RS232 switching by command;
- 1 mini USB port for configuration.
- GPS Antenna: External (SMA connector type) and Internal.
- GSM Antenna: External (SMA connector type) and Internal.
- Motion Sensor: Tri-axial acceleration sensor.
- Back-up Battery: Lithium battery with 860mAH capacity.
- Operating Temperature: -20°C ~ 80°C (without back-up battery condition).
- User Defined Interface (UDI): Optional.
- 2.4GHz RF Transceiver: Optional.
Vehicle and Driver Management
| Trip Data Recording | The following data is recorded: date and time, distance traveled, journey duration, vehicle speed, engine speed (RPM), journey departure and arrival time, driver name, driver ID, vehicle ID. |
| Driving Violations | The following standard violations are recorded: over speeding, over revving, green band driving, harsh braking, harsh acceleration, excessive idling and overtime driving. |
| Customised Events | Define customized events, such as driver door opening, no-go zone entered, hazard lights activated and refrigerator temperature exceeded. |
| Second-to-Second (Tacho) Data | The status of inputs such as speed and RPM is recorded every second. This provides valuable in-depth information for accident analysis. |
| Servicing and Licensing | Set reminders for your vehicle’s next service or vehicle/driver license expiry. |
